WOGAARD 1441000 Coolant Saver Recycle your Coolant to Machine Sump 0.3 GPM NOS!!

Description

WOGAARD 1441000 Coolant Saver Recycle your Coolant to Machine Sump 0.3 GPM NOS!!  1-Kit
*******************************************  FREE SHIPPING!!  **************************************
New Old Stock (NOS) in the manufacturer's original packaging (box).  Box has been opened to check contents and to photograph.  See pictures of actual item and condition.
Comes with all parts as shown.
Sold as 1-Kit (each).
The last one we sell has a slightly dirty book from handling, all other parts are perfect.
See the Wogaard website for an informative video (eBay prohibits us from posting the website link).
Wogaard Flood Coolant Systems & Pumps; Type: Coolant Saver ; Pump Capacity (GPM): 0.30 ; Hose Inside Diameter (Inch): 0.23 ; Coolant Line Length (Feet): 9.80
The Wogaard Coolant Saver collects the cutting-fluid that is normally wasted through the machine tools automatic chip conveyor. The cutting fluid is reclaimed from the chip-container and returned to the machine tool's main tank for re-use. Wogaard can help reduce consumption of cutting fluid and water, reduce the amount of waste fluid collected and disposed of and end fluid leaks that create potential health and safety issues. The Wogaard Coolant Saver is easy to install and is virtually maintenance free. It is driven by the machine tool's onboard coolant pump, so no external energy source is required. Building on the success of the Coolant Saver, Wogaard now also produce an Oil Saver for liquids up to 32 centistokes viscosity. This is recommended for sliding head machines and can be used in any application where neat oil is used.
This listing is for ONE (1)
WOGAARD 1441000 Coolant Saver Kit as shown.  Sold as 1-kit (each).
Thanks for looking!!
From the manufacturer:
The Coolant Saver
Especially designed for soluble coolant applications and possible to install in a wide range of CNC machines, the Coolant Saver will allow you to reduce, reuse and recycle the coolant that is dragged out into the swarf bins from the conveyor.
The Coolant Saver Kit Contains :
Coolant Saver Unit
Vacuum (Filtered) with 3m 6mm PU Hose *can be increased as much as 10 metres
1.5m - 12mm Hose Outlet
Fittings - 1/2' & 3/4' T & Straight fitting Kit
Full step by step Guide *Technical Support available.
Typical Application:
Soluble Coolant on machines with Conveyors.
Neat oil up to 12cs on Sliding head low rated pumps.
Specification:
​Operating Pressure - 1 to 45 Bar (not for use on higher pressure pumps)
Suction Capacity  -0.5 to -0.8bar (Valve control)
Collection Rate - Approx. 1Litre/min
Mounting - Can be used on Floor, waist or head high pumps to approx. 3m Height
Collection Tube Length - Vacuum Cup can be up to 10m from Coolant saver unit
Benefits of the Wogaard coolant saver
1. Save up to
50 percent of your coolant:
Save money and spend less time topping up coolant.
2. Improved swarf valve:
You get a higher price for swarf without coolant.
3. Manpower reduction:
No manual intervention to empty coolant from the swarf bin, as it is done automatically. Only swarf will require emptying from the bin.
4. Up to 90 percent saving in disposal:
Save money through reduced coolant disposal costs.
5. Improved housekeeping:
With no coolant in your waste bins, you stop coolant leaks and improve your workplace environment.
6. Help the
environment:
Recycle coolant and use the coolant saver kit without an external power supply.
On the road to ISO14001, with Wogaard's coolant saver kit you can reduce consumption of cutting fluid and water, reduce the amount of waste fluid collected and disposed of and end fluid leaks that create health and safety issues.
Testimonials: Mettis Aerospace
'Now we have the units fitted to the Matsuura machines in this cell we can look at calculating the savings that could be achieved by fitting the Coolant Saver to around 10 other machining centres we have identified as opportunities for improvement.'
As part of a continuous business improvement plan, Mettis Aerospace, a leading global service provider of precision-forged and machined components in titanium, aluminum and special steels, has installed the Wogaard coolant saver in a number of its advanced machining centres producing critical components.