S500 Hangsterfers 5 gallon pail

Description

S-500® Coolant Concentrate: Water Soluble Oil FEATURES  Extended Sump Life  Maximizes Tool Life  Extreme pressure technology  Non-Hazardous  General Purpose  Non- Irritating  Long Lasting And Bio-Stable  Non-Toxic Approved by Pratt & Whitney, and Conforms to Airbus ASTM F483 GENERAL DESCRIPTION The first choice for general machining for all metals and non-traditional materials. The EP properties produce excellent results over a broad range of manufacturing condition. This general purpose product satisfies some of the most demanding manufacturing operations from stamping, milling and turning processes. Amine free and safe on all materials while providing the best finishes and tool life on aluminum, steel to stainless steel. APPLICATIONS Primary Secondary Blanchard Reaming Broaching Forming Drilling Stamping Burnishing Surface Grinding Milling Turning Creep Feed Grinding ID/OD Grinding MATERIALS Primary Secondary Aluminum Chromium Alloys Brass Bronze High Temp Alloys Molybdenum Ceramics Copper Nickel Alloys Plastics Graphite Glass Powdered Metals Precious Metals Refractory Metals Steel Stainless Steel Titanium INSTRUCTIONS Always premix coolant before adding to the machine sump. When mixing coolant by hand it is important to always add the concentrate to the water and then agitate. For best results, a Hangsterfer’s recommended proportioning unit should be used. To maintain recommended concentration, make-up should be added at one-half the desired concentration. Always check concentration with a Refractometer. To maintain 6%: first charge the machine at 6%, then, as needed, add make-up as much as 3%. Avoid adding straight water or concentrate directly to the machine. OPERATION CONCENTRATION % Ratio Concentrate: Water Refractometer General Grinding 5 1:20 5 General Machining and Turning 7.5 1:13 7.5 Grinding with aggressive feed rates 10 1:10 10 Drilling, Tapping, Reaming 10 1:10 10 Light Stamping and Forming 10 1:10 10 MAINTENANCE S-500 is a bio-stable coolant, designed to control the growth of bacteria. Regular maintenance is required for maximum performance. Concentration should be monitored regular with a calibrated refractometer. S-500 gives a direct read on the refractometer (E.G. 5=5%). WASTE TREATMENT Dispose of in accordance with local, state, federal and international laws. If and when it is necessary to dispose of waste fluids, the amount of waste can be greatly reduced by separating the water from the oil and contaminants which accumulate through normal machining. You can often reduce your waste disposal by more than 80% through conventional methods such as Ultra-Filtration, Chemical Treatment or Evaporation. After approval by your local, state, or federal authorities, the waste water may sent to the sewer or discharged into waters, and the separated oils may be removed for recycling, sale or disposal.