Remote control signal RC to voltage 0-5V 0-10V linear conversion transmitter mod

Description

RC to voltage signal module
Module parameters
1. Power supply voltage: 9V ~ 24V
2. Signal input voltage range: 4~24V
3. Signal input frequency range: 0Hz～100Hz
4. Signal input RC range: 500 ~ 2500us (microseconds)
5. Output voltage: 0.00V ~ 5.00V/0.00V ~ 10.00V
6. Input method: J1 pad on the circuit board: the default is open circuit, not used.
7. Output mode: J2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.
8. Scope of application: remote data acquisition and control equipment;
9. Dimensions: (length) 26mm * (width) 23mm * (height) 10mm
10. Module interface:
12V: Positive power supply interface (9V ~ 24V).
G: Power ground interface.
IN: Signal input positive connector.
G: Signal input negative terminal.
OUT: Signal output interface (0.00V ~ 5.00V/0.00V ~ 10.00V).
G: Power ground interface.
Note: When outputting 0.00V ~ 10.00V, the power supply voltage should be 15V.
RC signal 500 ~ 2500us (microseconds) turn (0.00V ~ 5.00V) or (0.00V ~ 10.00V)
Package
1pc RC TO DC transmitter