Orbital Schweiß-kopf Spann-Backen-Schalen Collets Welding 42080594-25 Ø 1/8in

Description

You are bidding on a new set of welding jaws in this auction.
Orbital sweat-head clamping jaw shells
Collets Welding Tools
Part No. 42080594-25
Ø 29.00mm
R1 = 14.5mm
R2 = 38mm
R3 = 36mm
B1 = 11.9mm
B2 = 6.4mm
Tel .: 035725/72591
The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at
SB 3
Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges.
If payment is received by 2 p.m., the item will be dispatched the same day.
rating
If you have bought from us, we ask you to rate us.
We want you to enjoy shopping with us and we don't want to
make you dissatisfied. In case you have something to complain about in the article
please contact us before leaving us negative or
evaluate neutral.
I accept the following payment methods
- bank transfer
- Cash payment upon delivery
-PayPal
IMPORTANT INSTRUCTIONS
The private end consumer has a right of withdrawal in distance selling contracts.
According to the law, he has the within two weeks of receiving the goods
Possibility to cancel the contract without justification. The revocation must be in writing
done (letter, email, fax); timely dispatch to the in
address given on the invoice. For the 1st January 2002 has the previously valid right regarding the statutory
Warranty changed. Since then, a warranty period of 2 years applies
Date of purchase. Within this period, the buyer can report defects in the goods, insofar as these
already existed when the goods were purchased - complaint and rework (repair)
or request an exchange. The buyer must do so within the first 6 months of the purchase date
do not provide evidence that the fault complained about already upon delivery
the goods existed. From the 7th This proof is, however, one month after delivery of the goods
required.
This does not include damage caused by
improper handling, intentional or negligent damage, improper
Installation or Installation, connection to wrong mains voltage, normal wear,
Failure to follow the instructions for use, chemical or electrochemical effects
and force majeure arise. This restriction also applies to an error caused by
improper repair by a service partner not authorized by MOTOSTORE41
arose. If the goods cannot be repaired or exchanged, we will
The goods value will be credited to you, minus shipping costs and insurance.
WARNING
Please only bid if you really want to buy this item.
MY RECOMMENDATION
All you have to do now to be the new owner is yours
enter personal maximum bid. If you are up to the last minute or
Waiting seconds of the auction, the risk of being outbid is particularly high,
because unfortunately too many eBay participants offer so-called "sniper tools". Sniper
Tools are computer programs that set the highest bid a few seconds before the end of the
Enter the auction even if the bidder is not at the computer himself. If you
were leading bidders without entering your actual maximum bid,
will outbid you in the last few seconds. It remains in the rarest of cases
enough time to place another bid.
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne
You are bidding on a new set of welding jaws in this auction. Orbital sweat-head clamping jaw shells Collets Welding Tools Part No. 42080594-25 Ø 29.00mm R1 = 14.5mm R2 = 38mm R3 = 36mm B1 = 11.9mm B2 = 6.4mm Tel .: 035725/72591 The article is sold as it can be seen in the pictures. If you have any questions, send us an email or call us at SB 3 Please ask for shipping costs outside of Germany before buying. Please ask for delivery charges. If payment is received by 2 p.m., the item will be dispatched the same day. rating If you have bought from us, we ask you to rate us. We want you to enjoy shopping with us and we don't want to make you dissatisfied. In case you have something to complain about in the article please contact us before leaving us negative or evaluate ne