-40%
Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump
Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump
Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump
Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump
Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump

Little Giant TE-6-MD-HC 1/2 HP Magnetic Drive Pump

$ 210.67

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back
  • MPN: 586925
  • Condition: Calling used, but I don't actually believe this has been run. The electrical doesn't look like it's been wired. No visible damage whatsoever. Calling used because it does look and smell like item has been in contact with some sort of chemical. Free returns if anything is found to be defective so buy worry free and save money.
  • Flow Rate: 38 gpm
  • Item must be returned within: 30 Days
  • Supply Voltage: 115/230 V
  • Brand: Little Giant
  • Restocking Fee: No
  • Outlet Diameter: 3/4 in (20 mm)
  • Inlet Diameter: 1 in (25 mm)
  • Number of Phases: 1 Phase
  • Rated Power: 1/2 hp

    Description

    Little Giant Magnetic Drive Pump
    CAT# TE-6-MD-HC
    Specs
    Item
    Magnetic Drive Pump
    HP
    1/2 hp
    Voltage
    115/230
    Full Load Amps
    11.60/9.40
    Inlet
    1 in FPT
    Outlet
    3/4 in MPT
    Motor Type
    PSC
    Motor Enclosure
    TEFC
    GPM of Water @ 6 Ft. of Head
    38.0
    GPM of Water @ 9 Ft. of Head
    36.2
    GPM of Water @ 15 Ft. of Head
    34.0
    GPM of Water @ 18 Ft. of Head
    33.1
    GPM of Water @ 24 Ft. of Head
    30.5
    GPM of Water @ 40 Ft. of Head
    21.6
    GPM of Water @ 50 Ft. of Head
    2.0
    Max. Head
    51 ft
    Length
    15 1/4 in
    Width
    8 3/4 in
    Height
    7 in
    Temp. @ 0 psig
    180 Degrees F
    Temp. @ 10 psig
    175 Degrees F
    Temp. @ 20 psig
    170 Degrees F
    Temp. @ 30 psig
    165 Degrees F
    Operating Pressure
    22.0 psi
    Housing Material
    PPS
    Impeller Material
    PPS
    Max. Specific Gravity
    1.1
    Max. Viscosity
    100 SSU
    Mounting
    Horizontal
    Bearing Type
    Thrust
    Design
    Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
    Gasket Material
    FKM
    Series
    MD-HC
    Application
    For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage