LITTLE GIANT TE-5-MD-HC Pump Magnetic Drive Hi-Temp Corrosive REBUILT 115V

Description

I have 23 years of experience maintaining fixing and rebuilding pumps.
Great condition. This pump has been disassembled, cleaned, inspected t
hen tested.
Any non-functional components were replaced. The FKM(Viton) O-Ring is brand new Costs 14.00 from little Giant.
Typical scuffs, scratches,
and/or other surface imperfections. See photos.
Please review all photos and feel free to contact me with any questions.
PRODUCT DETAILS
This Little Giant® magnetic drive pump features a rugged design that helps eliminate seal-caused friction loss, wear, leakage, and contamination. Pump includes a motor and can handle liquids such as photographic and plating solutions, acids, alkalis, brines, and distilled water.
TECHNICAL SPECS
Item
Magnetic Drive Pump
HP
1/8
Voltage
115/230
Full Load Amps
3.00/1.50
Inlet
1" FPT
Outlet
1/2" MPT
Motor Type
PSC
Motor Enclosure
TEFC
GPM of Water @ 3 Ft. of Head
19.2
GPM of Water @ 6 Ft. of Head
18.2
GPM of Water @ 9 Ft. of Head
17.0
GPM of Water @ 15 Ft. of Head
14.8
GPM of Water @ 18 Ft. of Head
12.7
GPM of Water @ 24 Ft. of Head
8.4
Max. Head
29.3 ft.
Length
11-1/4"
Width
5-1/4"
Height
7-1/2"
Temp. @ 0 psig
180 Degrees F
Temp. @ 10 psig
165 Degrees F
Temp. @ 20 psig
145 Degrees F
Temp. @ 30 psig
135 Degrees F
Operating Pressure
12.7 psi
Housing Material
PPS
Impeller Material
PPS
Max. Specific Gravity
1.1
Max. Viscosity
100 SSU
Mounting
Horizontal
Bearing Type
Thrust
Cord Length
6 ft.
Cord Type
3-conductor SJO
Design
Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Gasket Material
FKM
Series
MD-HC
Application
For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage