AFTERGLOW Vehicle Photoluminescent Lighting Tape kit NEW SET MAGNET STRIP +TAPE

Description

The CTVL Kits are the latest in a series of DHi® Emergency Egress Lighting (EEL) kits originally developed in a highest national priority effort to help Mine Resistant, Ambush Protected (MRAP) vehicle operators survive Improvised Explosive Device (IED) attacks and other mishaps that left the operators trying to escape from an MRAP in low-light conditions. MRAP vehicles are armored fighting vehicles designed to survive IED attacks, mines and ambushes. DoD determined that MRAP exits and escape hatches needed to be positively marked or illuminated to aid emergency egress. After evaluation, DHi’s Emergency Egress Lighting™ Kits were selected for rapid field installation inside the troop compartment and driver/passenger sections of all MRAP vehicles in order to provide the warfighter with simple, highly reliable emergency markings. AfterGlow® PL products identify locations of door latches/openings, grab bars and emergency equipment such as fire extinguishers in the absence of daylight or electrically powered lighting. DoD messages to MRAP operators identified DHi as the sole producer of the MRAP PL products. The new CTVL kit includes one 25’ roll of 1” wide, adhesive-backed AfterGlow® brand photoluminescent tape, two hybrid photoluminescent/retroreflective AfterGlow® brand fire extinguisher labels, and 25 alcohol wipes for cleaning and preparing surfaces for installation and for cleaning the PL after installation
Low Level Exit Path Markings (LLEPM) are a relatively new type of Life Safety Improvement and consist of a mix of exit path markings at traditional heights and other markings located near the floor where they wouldn’t be hidden by a layer of dense smoke descending from the ceiling and where they could be seen by someone crawling along the floor. Photoluminescent tape can provide life-saving exit guidance to all residents, employees and tenants during an emergency evacuation by defining a space, border, or path so occupants can identify a safe route to an exit. Our safety-grade photoluminescent tape materials are inert, waterproof, non-toxic, non-radioactive and can be charged over and over again. A full charge providing 8 or more hours of luminance on DHi's AfterGlow® photoluminescent tape is achieved by exposing the tape material to:
3-4 minutes of ultraviolet (black) light, or
7-8 minutes of direct sunlight, or
21-23 minutes of fluorescent light, or
24-26 minutes of incandescent light.
YOU ARE BUYING GOV. SURPLUS AND ARE BUYING AS IS IN ORIGINAL BOX SO THERE WILL BE NO RETURNS DO NOT BUY IF YOU DON'T AGREE