2 inch REAR LOWERING KIT FIT For 2002-2022 HARLEY TOURING STREET ROAD KING GLIDE

Description

Drop your Harley Davidson 2" inches to achieve a superb slammed stance. Lowered baggers look better, and are easier on the legs. Lowering links are easy to install; attaches to existing shock/strut mounts.
Important Features:
2" lowering kit
Attaches to existing suspension mounts
Includes all required hardware
Fits '02-'21 Harley Touring models with coil shocks & air shocks
Built with high endurance steel
*Note: '14+ Street Glide, Road King, and Road Glide models w/ 12” adjustable shocks (P/N 54000114 / 54000096) must not exceed 250 lbs laden with lowering kit installed.
Fitment:
For2002-2021 Electra Glide / Ultra Limited FLHT
For 2002-2021 Road King  (w/o Leather Saddlebags)
For 2002-2021 Road Glide
For 2006-2021 Street Glide
Legal Disclaimer
1. Lowering your bike will reduce clearance. The operator must use extreme caution when operating a modified motorcycle, particularly while familiarizing yourself with its altered handling characteristics.
2. Separate purchase of LOCTITE 243 Threadlocker and Sealant - Blue or equivalent is required to install this kit.
3. After lowering, your side stand may require bending. Check your motorcycle for a proper parking lean angle. This modification is intended for custom motorcycles. It is not intended for motorcycles ridden on the streets or highways.
4. Rider and passenger safety depend upon the correct installation of this lowering kit. If the procedure is not within your capabilities, or you do not have the correct tools, have a professional repair shop or a qualified mechanic perform the installation. Improper installation of this kit could result in death or serious injury.
5. When lowering your bike, it changes the suspension's geometry, which will change the way it rides and handles. It is not liable for any damages that may occur by lowering your bike. Because we cannot control our products' application or installation, the buyer assumes all damage caused to himself/herself, a third party, and the item being installed under these parts' failure. Great care should be taken when installing this kit to ensure nothing rubs or bottoms out. It is the buyer's responsibility to adjust settings accordingly.
6. When you are finished with the installation, make sure you double-check all clearances, such as tire, belt guard, chain guard, etc. To prevent any rubbing before you take it for a ride.
7. Important reminder, recheck all bolts after a couple of miles.